TX Series

Excellent benefits from high quality manufacturing

Model range

TX 66 Y3
TX 66 Y2 Quattro
TX 66 Y2 Twin
TX 52 Y3
TX 52 Y2 Quattro
TX 52 Y2 Twin

TX Series

High performance from within

High quality double anchor pre-tensioned ballscrews provide high thermal stability.

Servo driven turret with hydraulically clamped Curvic Coupling. Rigid tapping.

Prismatic guide ways. Acceleration of 1 g.

High performance CNC control unit and servomotors.

Waste lubrication oil piped to a separate tank preventing coolant contamination.

Removable, separate coolant tank. Guarding design prevents coolant contact with the machine bed ensuring thermal stability.

Smart automatic lubrication system saves money and increases reliability.

Hydraulic cylinder operating at 45 kg/cm2.

Front and rear roller spindle bearings give high rigidity, accuracy and long life.

Electric cabinet totally sealed (IP55 protection).

TX Series

Examples of Simultaneous Machining

3x High rigidity 24 position turrets

• 3x ±40 mm Y axis
• 2x spindle with full C axis
• 3x 18 Kw 52 Nm Milling Motors
• 18x CNC controlled axes

TX Series

Travels & Interferences

TX Series

Automate your production with the CNC controlled automatic parts loader

VERY EASY TO USE.
Easy to use and to program, CMZ have developed a conversational programming system that makes it very easy to set and use the automatic parts loader.

.

Large capacity loader.
The loader arm is fitted with twin grippers that can carry two components up to 3kg each and up to 150mm diameter. Having twin grippers means that both the raw and finished part can be carried at the same time. This reduces the loading time and minimises the distance that the loader has to travel.

• Z axis speed (longitudinal): 180 m/min.
• X axis speed (vertical): 120 m/min.

Loader with non-stop machining feature.
The innovative design of this loader allows a part to be loaded or unloaded from the either chuck without stopping the opposite spindle. Unlike a gantry loader where the cycle has to stop for loading, this system allows for continuous production. This feature ensures maximum machine utilisation and minimises cycle times.

Universal parts stocker.
The parts stocker allows a wide range of component types and sizes to be stored in the pre-machined and finished state. Blanks up to 150mm and 3kg
can be accommodated by the automatic loader and stocker. Shafts up to 300mm long can also be handled

CMZ offer a wide range of products for automation.
Contact us for more information.

TX Series

Latest generation control systems

Manual Guide i.
Conversational programming simplifies programming and program proving.

Tool life management (optional).
40 groups of up to 8 tools per group can be established so that when the life of the tool is over, either through the number of times that this has been called up or through cutting time, the machine automatically changes to the following tool from that group.

Screen for displaying the state of tool life.

Nano CNC.
The CNC makes internal calculations for the servos in 1/1000 of a micron (in nanometres - 0.000001mm).

0.0001 mm resolution
& 1 g acceleration. With 1 million pulse encoders, better precision, surface finish and aceleration are achieved.

Manual handle retrace function.
With this function you can retrace (forward and reverse) the programmed tool path of all 3 turrets using the electronic handwheel. This function can greatly reduce the setup time of the machine.

Electronic detection of colisions.
This function detects any abnormal torque on machine motors caused by mechanical impacts, immediately stopping machine heads and axes, which prevents further damage.

Tool load monitoring (optional).
This function memorises the power consumption of each tool when the tool is new. Any change in power consumption is used to detect either a worn tool or a broken tool. This reduces the danger of accidents and rejects when working unattended jobs.

Screen for typing values of tool wear and breakage.

Ethernet connection.
Connect the machine to your network using the CNC’s FTP client to load and unload programs from a PC.

Introduce a memory card and use it as a hard drive.

Insert a memory card then save and execute programs from it. The memory card can be installed permanently into the covered slot on the front panel. Once fitted, the cover can be closed for protection.

TX Series

Tooling system:

TX Series-Dimensions